Step Two: Inspect the Inside and Locate the Fan(s) In addition to the pentalobe screws, you also have to use a suction cup and a guitar pick to get the cover completely off. Now, beginning with the Touch Bar MacBook Pro in 2016 (including the non-Touch Bar models), Apple introduced a new step to the removal of the bottom cover. Some MacBook models also have a couple of small clips that hold the cover in place from the center, but you can carefully just pry up the cover to unclip it. Once you have all the screws removed, you can lift up the bottom cover from the back. Keep track of each screw and where it goes, because some of them are different lengths Take your P5 pentalobe screwdriver and remove the screws around the perimeter of your MacBook. Flip over your MacBook so that the bottom is face up. This step is pretty much the same for any modern MacBook, except for the newer Touch Bar models (more on that below). You’ll want to keep track of screws and take your time with something like this. Great for removing or loosening up stubborn particles of dust and/or dirt. Needed if you have a 2016 MacBook or newer.Īn easy way to get rid of most of the dust. If you don’t already have one, it’s best to You’ll need a few things before you get started, some of which you may already have.
0 Comments
Leave a Reply. |